Teether Ring and Clip: How to Attach It Safely to Baby's Outfit

By JuJuBe | Published: 2026-11-03

Category: Guias Práticos

Learn how to attach a detachable teether clip to baby clothes without pinching or tangling. Step-by-step tips for safe, secure placement.

Quick answer

Attach the detachable clip to a snug, flat part of baby's outfit—like a collar or shoulder seam—so the ring hangs no lower than chest level. Always double-check the clip is fully closed and the ring can't loop around the neck.

Why placement matters more than clip strength

A teether clip keeps the ring within reach and off the floor, but a poor attachment point can cause the ring to swing into baby's face or get caught on furniture. Choose a spot that stays relatively still as baby moves—shoulder seams and collars work better than sleeve cuffs or hems.

Avoid attaching to loose fabric, hoods, or drawstrings. These can shift, tighten unexpectedly, or create a loop. The clip should grip a single layer of fabric and lie flat against the body.

When to skip the clip entirely

If baby is crawling or pulling to stand, a dangling ring can snag on objects. In those stages, use the teether without the clip or attach it to your own clothing while supervising. Also skip the clip during stroller rides if the ring could swing against baby's face.

Never attach the clip to a car seat, high chair, or playpen unless the manufacturer explicitly allows it. The clip is designed for clothing, not for anchoring to gear.

Step-by-step: attaching the teether clip safely

Choose a snug, flat attachment point: Pick a single layer of fabric at the shoulder seam or collar—not a cuff, hem, or hood. Smooth the fabric flat so the clip can grip evenly. Checkpoint: the fabric should not bunch or fold under the clip.
Open the clip fully and slide it onto the fabric: Squeeze the clip open and slide it over the edge of the fabric until the teeth are on both sides. Release slowly so the teeth close on the fabric, not on baby's skin. Common mistake: letting the clip snap shut before it's fully on the fabric, which can pinch.
Tug gently to test the hold: Give the clip a soft pull—about the weight of the ring—to confirm it stays put. If it slides off, try a tighter weave or a different seam. Checkpoint: the clip should not move more than a centimeter when tugged.
Position the ring at chest level or higher: Adjust the clip so the ring rests against baby's chest, not near the neck or face. The ring should hang freely without looping around anything. Common mistake: attaching too low, letting the ring swing into baby's mouth or get stepped on.
Do a final safety check before handing it over: Confirm the clip is fully closed, the ring is secure, and there are no loose threads or gaps. Check that baby can't pull the clip off and put it in their mouth. Checkpoint: always supervise while the clip is attached.

Product facts

Silicone Teether Ring & Detachable Clip - Bonjour Bébé: The Silicone Teether Ring & Detachable Clip - Bonjour Bébé has three massaging textures and is freezer-safe for cooling relief. The clip keeps the textured ring handy so baby can choose the surface that soothes sore gums without dropping it.
Silicone Teether Ring & Detachable Clip - Bonjour Bébé